Asme U Stamp Industrial Distillation Reboiler (P042)
Basic Info
Model No.: 3000L
Product Description
Model NO.: 3000L Application: Paper and Pulping Industry Pressure: 0.1MPa≤p<1.6MPa Pressure Level: Low Pressure (0.1MPa≤p<1.6MPa) Name: Asme U Stamp Industrial Distillation Reboiler Dimension: 900mm Weight: 7tons Product Type: Heat Exchanger Tubesheet Material: Titanium Gr.2/SA266 Trademark: Suntech Origin: Nanjing Function: Exchanger Material: Titanium Storage Medium: Flammable/Toxic Condition: New Volume: 3000L Length: 6000mm Usage: Liquid Industry Surface: 180 Sqm Brand: Suntech Specification: ASME U, PED, TEMA, API650, EN13445 HS Code: 84196019 Item Name: ASME U Stamp Industrial Distillation Reboiler
Application: Paper and Pulping
Tube Material: Titanium Gr.7
Tubesheet Material: Titanium Gr.7/SA266
Dimension: Dia. 900* Length 6000mm*Surface 180 sqm
Weight: 7 tons
Reboilers are heat exchangers typically used to provide heat to the bottom of industrial distillation columns.
They boil the liquid from the bottom of a distillation column to generate vapors which are returned to the column to drive the distillation separation.
Proper reboiler operation is vital to effective distillation. In a typical classical distillation column, all the vapor driving the separation comes from the reboiler. The reboiler receives a liquid stream from the column bottom and may partially or completely vaporize that stream. Steam usually provides the heat required for the vaporization.
The most critical element of reboiler design is the selection of the proper type of reboiler for a specific service.
Most reboilers are of the shell and tube heat exchanger type and normally steam is used as the heat source.
In such reboilers. However, other heat transfer fluids like hot oil or Dowtherm (TM) may be used. Fuel-fired furnaces may also be used as reboilers in some cases.
Penetration Testing
We provides high grade Pressure Vessel, reactors, heat exchangers, heaters, towers, tanks, columns, condensers, reboilers, separators, evaporators made of Nickel Alloy, Titanium Alloy, Copper-Nickel Alloy, Zirconium, Tantalum Alloy, Super Stainless Steel and clad metals, designed and fabricated according to ASME U, PED, TEMA, API650, EN13445 and other codes. These products have been widely used in such fields as petro-chemical, chemical, salt manufacturing, pharmacy, metallurgy, power, electronics, sea-engineering and environment protection, by Global Top 50 Chemicals for one decade.
Our mill is entitled with Grade A1 for design, Grade A1 for fabrication of pressure vessels and ASME U stamps authorization. It is an ISO9001 company certified by National Quality Assurance Limited and awarded with three As of Credit Rating and High- tech enterprise.
We have around 40 welders qualified for 252 types of welding, including SAW, STAW, GTAW, GMAW) and 9 persons for non-destructive inspection (including PT,UT,MT,PT), and 5 NDE persons are qualified with the requirements of ASME.
R & D Dep. is capable of designing drawings with CAD according to GB and ASME standards. It has such technique specifications and standards related to designing, including ASME, TEMA, API650 and etc.
Our manufacturing area for pressure vessel is 14000m2(1st phase) and 15000 m2(2nd phase), among which, there are more than 1000M2 isolated workshop on non-ferrous metal welding. Rolling capacity is 80mm maximum and crane capability is 100 tons maximum.
Contact us if you need more details on Asme U Stamp Reboiler. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Reactor、Heat Exchanger. If these products fail to match your need, please contact us and we would like to provide relevant information.
Application: Paper and Pulping
Tube Material: Titanium Gr.7
Tubesheet Material: Titanium Gr.7/SA266
Dimension: Dia. 900* Length 6000mm*Surface 180 sqm
Weight: 7 tons
Reboilers are heat exchangers typically used to provide heat to the bottom of industrial distillation columns.
They boil the liquid from the bottom of a distillation column to generate vapors which are returned to the column to drive the distillation separation.
Proper reboiler operation is vital to effective distillation. In a typical classical distillation column, all the vapor driving the separation comes from the reboiler. The reboiler receives a liquid stream from the column bottom and may partially or completely vaporize that stream. Steam usually provides the heat required for the vaporization.
The most critical element of reboiler design is the selection of the proper type of reboiler for a specific service.
Most reboilers are of the shell and tube heat exchanger type and normally steam is used as the heat source.
In such reboilers. However, other heat transfer fluids like hot oil or Dowtherm (TM) may be used. Fuel-fired furnaces may also be used as reboilers in some cases.
Penetration Testing
Item | Item Name | Code |
1 | Heat Exchanger | TEMA,ASME,EN13445,PED |
2 | Tower | ASME,EN13445,PED |
3 | Vessel | ASME,EN13445,PED |
4 | Storage Tank | API620,650 |
5 | Reactor | ASME,EN13445,PED |
We provides high grade Pressure Vessel, reactors, heat exchangers, heaters, towers, tanks, columns, condensers, reboilers, separators, evaporators made of Nickel Alloy, Titanium Alloy, Copper-Nickel Alloy, Zirconium, Tantalum Alloy, Super Stainless Steel and clad metals, designed and fabricated according to ASME U, PED, TEMA, API650, EN13445 and other codes. These products have been widely used in such fields as petro-chemical, chemical, salt manufacturing, pharmacy, metallurgy, power, electronics, sea-engineering and environment protection, by Global Top 50 Chemicals for one decade.
Our mill is entitled with Grade A1 for design, Grade A1 for fabrication of pressure vessels and ASME U stamps authorization. It is an ISO9001 company certified by National Quality Assurance Limited and awarded with three As of Credit Rating and High- tech enterprise.
We have around 40 welders qualified for 252 types of welding, including SAW, STAW, GTAW, GMAW) and 9 persons for non-destructive inspection (including PT,UT,MT,PT), and 5 NDE persons are qualified with the requirements of ASME.
R & D Dep. is capable of designing drawings with CAD according to GB and ASME standards. It has such technique specifications and standards related to designing, including ASME, TEMA, API650 and etc.
Our manufacturing area for pressure vessel is 14000m2(1st phase) and 15000 m2(2nd phase), among which, there are more than 1000M2 isolated workshop on non-ferrous metal welding. Rolling capacity is 80mm maximum and crane capability is 100 tons maximum.
Contact us if you need more details on Asme U Stamp Reboiler. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Reactor、Heat Exchanger. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Pressure Vessel
Premium Related Products
Other Products
Hot Products
Plastic Buried Nozzle for IrrigationHigh Quality Hot Sale Centrifugal FilterHigh Quality Hot Sale Drip Irrigation ArrowHigh Quality Titanium Capillary TubeHigh Quality Titanium Sheet TargetASTM B265 Gr2 Titanium Polish Foil for IndustryTitanium Standard Parts Gr1High Quality Titanium Straight WireASTM B862 Gr1 Titanium Welding PipeASTM B265 Gr2 Pure Titanium SheetASTM B348 Gr1 High Strength Titanium Straight BarHigh Quality Shell and Tube Condenser (ASME standard)ASTM B265 Gr2 Hot Rolled Pure Titanium Plate (T002)Steel/Aluminum Clad Plate (Explosion Bonded) - Transition Joint Plate (E001)2016 High Quality Nickel Alloy Bars2016 High Quality Nickel Alloys Pipes